Disc Brake Conversion Kits - 1967 - 1969 Camaro Parts - Steve's Camaro Parts - 650-873-1890



Despite the volumes written about the legendary prowess of '60s muscle cars, the words always seem to gloss over some serious engineering shortcomings of the era. Brake packages were often, in a word, terrifying. One good shot was the most you got, if you were lucky. After that, it was white-knuckle time when it came to stopping in a hurry--and that was with a power plant kicking out factory horsepower. Brake fade was the name of the game. Add a cam, some carb, headers, and exhaust, and stopping becomes even more elusive. While drum brakes are great for stopping lumbering buses and dump truck, they're no good for gas-huffing muscle cars.

The good news is that it's never been easier to upgrade your '67. 68 and 69 1st Generation Camaros to a disc brake package.
 

Here is the perfect kit

13" Power 4 Wheel Disc Brake and Line Kit(Big Brakes)
for use with 17" rims or larger ONLY!!
67-68-69 Camaro SUPER BIG BRAKE KIT!!

Front includes:Black or Red Powder Coated PBR (same maker for Corvette and Baer brakes) Dual Piston Aluminum Calipers
Pair of 13" rotors - Drilled, Slotted, and Zinc Plated! The Drill and Slotting will help to remove buildup on your pads as well as help cool the rotor, the zinc plating will help prevent surface rust!
2024-T6 Forged Aluminum Brake Hub's
Inner and outer USA MADE TIMKEN Bearings!
Inner seals
Pair of fully machined plated caliper bracketsFull Ceramic Brake Pads
Pair of Dust caps
Pair Stainless Steel Braided (Caliper to Frame)
Pair banjo bolts with washers
All necessary hardware (nuts bolts)
Includes 7/16" Studs

Rear includes:
Pair of 12" Drilled, Slotted, Zinc Plated rotors with 7/16" Stud Patterns- Vented for proper cooling
Pair of Plated caliper brackets 
Special shim kit included - This shim kit includes many sizes and will help dial in the caliper adjustment over the rotor for proper fitment! Many kits on the market do not include this shim kit and will require you to shave the pad for proper fitment.
NEW pair of single piston Black Powder Coated calipers with built in E-Brake(Staggered Kit includes 2 Right Hand Calipers and brackets for routing around the shock mounts)
Creramic pads
Pair Stainless Steel Braided flex hoses
Pair of E-Brake Cables - Designed to fit your application
All necessary hardware (nuts bolts)

Steves kit also includes
The correct Disc brake line kit pre bent and ready to install you chose standard steel that has stood the test of time for 40+ years or Stainless Steel
Power Brake booster with Firewall brackets, rod and pedal hardware
Dual bowl Cast Master Cylinder with Gold Cadnium Plated Lid
Preset propotioning valve with low pressure warning switch
Master to prop valve lines, bracket and hardware
 

Note: If your car currently has front drum brakes this kit will push the wheels out up to 3/8" per side. If you have the factory style disc brakes it will not push the wheels out. for use with 17" rims or larger ONLY!! 


source: http://www.superchevy.com/technical/chassis/brakes/0509sc_rdisc/
by Mike Bumbeck

YOU ARE NOT JUST BUYING PARTS – YOU ARE GETTING OUR CAMARO EXPERTISE

Tags: camaro part, camaro parts, Camaro restoration parts, 69 camaro, 1969 camaro, aftermarket camero parts, chevrolet camaro, ss, z28, rs, chevrolet, restoration, 68 camaro, chevy, 67, 69, f-body, camaro, chevy camaro, chevrolet camaro, gm, z-28, 350, ls1, z/28, pace car, camaro ss, 69 camaro, first generation, copo, fbody, yenko, 67 camaro, 68 camaro, musclecar 


http://www.stevescamaroparts.com